Reclaimed Wood Bar Table And Stools

Reclaimed Wood Bar Table and Chair Sets

Bar Top Tables For Rent

The Best Design of Bar Top Tables to Suit...

August 3, 2019 Bar Table

Console Bar Table Design

Console bar table – The classic retro design of a half-moon table will be the perfect addition to your bar, no matter if the decor is 50’s satellite or vintage. The table design is adaptable to a variety of styles and decors.  Determine the size of your table. Place a couple of chairs around the place you want to place the table and see what works. A table that is too small can be swallowed up by your bar, while one that is too large will be an obstacle for people moving in the area. Once you know the dimensions you want, pull off the edge of a half-circle on the sheet of MDF.

Bar Console Cabinet

Bar Console Cabinet

READ  Best Kitchen Bar Table Sets

Then draw the outer edge of a second, larger circle so that it touches the midpoint of the first circle. This gives you your half-moon shape.  Determine the height of the console bar table. Most bar table will be on the coffee table height. If possible, find a table whose height you want to match and measure from the floor to the lower edge of the table.

17 Inspiration Gallery from Console Bar Table Design

Image of: Tall Console Bar Table
Image of: Sofa Console Bar Table
Image of: Perfect Console Bar Table
Image of: Modern Console Bar Table
Image of: Long Bar Height Console Table
Image of: Liberty Console Bar Table
Image of: Heatherbrook Console Bar Table
Image of: Counter Height Console Table With Storage
Image of: Console Table With Bar Stools
Image of: Console Bar Table With Stools
Image of: Console Bar Table Plan
Image of: Console Bar Table Ideas
Image of: Best Console Bar Table
Image of: Bar Height Console Table With Stools
Image of: Bar Height Console Table Ikea
Image of: Bar Console Table Ideas
Image of: Bar Console Cabinet
 
READ  Making Stainless Steel Bar Table

This will be the height of the console bar table.  Cut your table legs. Using the length you determined in Step 2, divide your table leg from 2 x 2 boards. Use a table saw or circular saw to make sure you have a clean smooth cut on the top and bottom. You need at least three legs, positioned as shown in the picture. If your table is very large, you may want to add an extra pair of legs.

Comments are closed.

https://www.johnbonhammemorialfund.com/ -->