Safety Supply Storage

Safety Storage Cabinets for Flammable Liquids

Pedestal Sink Storage Cabinet Small

Pleasant Design Pedestal Sink Storage Cabinet

May 15, 2019 Storage Cabinet

Mounting Wall Storage Cabinets

Hanging wall storage cabinets is not the same as hanging a picture. Due to the weight of the cabinet and its contents, it must be mounted directly on wall joists. The cabinet must be level, and it must also be plumb (straight up and down) along the sides and the front. In older houses, it is not uncommon for the walls to be leaning forward.

Accent Wall Cabinets

Accent Wall Cabinets

Instructions

12 Inspiration Gallery from Mounting Wall Storage Cabinets

Image of: Wooden Wall Cabinets
Image of: White Storage Cabinets
Image of: Unique Wall Cabinets
Image of: Traditional Modern Wall Cabinet
Image of: Small Modern Wall Cabinet
Image of: Simple Wall Cabinets
Image of: Review Storage Cabinets
Image of: Modern Wall Cabinet with Sliding Door
Image of: Inspiring Storage Cabinets
Image of: Gloss Modern Wall Cabinet
Image of: Bathroom Wall Cabinets
Image of: Accent Wall Cabinets
 

Measure the back of the first wall cabinet, along the height and width. Mark the dimensions of the wall with a pen, angle hook and level, so the horizontal lines are level. Find and mark each stud within the perimeter outlined area, using your electronic finder. Mark the positions of the studs on the back of the cabinet, measure the distance of each pin from the vertical lines on the wall. Mark vertical lines on the back of the cabinet at the same distance from the edges.

READ  Beautiful and Nicely Organized Entryway Storage Cabinet

Drill two guide holes on the back of the storage cabinet at the top and bottom of each vertical pin line, one-half foot from the top and bottom of each row. Set your level beside the front of the cabinet. Use your screwdriver to loosen the screws if necessary and stick shims behind to move the cabinet forward or backward and get it soldered. If the top of the cabinet is tilted forward, loosen the lower screws and shims behind the bottom. If the bottom of the cabinet is tilted back, loosen the best screws and shims behind the top. Tighten all screws.

READ  Ideas for Having an Orderly Under Cabinet Storage

Comments are closed.

https://www.johnbonhammemorialfund.com/ -->