White bar cart – If you host a lot of outdoor parties, consider adding a rolling backyard bar for your outdoor living space. Commercial rolling bars are widely available in a variety of colors and styles, but many of these come with a hefty price tag. A simple yet attractive bar wagon is a DIY project that even a novice woodworker can do. This white bar cart is very practical, with top and bottom slatted shelves and large front wheel.
Cut two side pieces for the carriage measures 41 1/2 inches long. Make these pieces as the top side. Cut four leg pieces measuring 42 inches long. Make these pieces like legs. Two legs lay flat on a level working space parallel to and 29 1/2 inches apart. Place one of the top side panels across the top of both legs. Adjust the top piece so that its left end is flush with the end of the left leg. On the right side of the top piece to hang over your right leg six inches; this will form the handle of the white bar cart. Screw the legs to the upper table. This makes the side of the carriage.
After that to make wooden white bar cart, cut two stretcher boards measuring 16 inches long. Place the two sides of the vehicle, so that they are lined up with each other and 16 inches apart. Place the first stretcher board between the back legs and directly under the top piece. You can attach stretcher table to the side screw through the back legs and the ends of the stretcher. Repeat on the front of the legs.